Compact BLE 5.1 Directional Finding Sensor, Beacon

SC833F is a Bluetooth 5.2 temperature, humidity, motion sensor supporting BLE 5.1 directional finding.

SC805M and SC833AF are BLE 5.2 beacons.

Sensor is preloaded with firmware supporting iBeacon and Eddystone beacon protocols. Directional finding codes are not preloaded.

Market Ready Enclosure, Just Add Your Firmware

These sensors are in market ready enclosure.  Upon completion of firmware and apps development, you can begin marketing products.

SC833F, Bluetooth 5.2 Environmental Sensors

• AMS ENS210, temperature and humidity sensors

• ST Micro LIS3DH 3-axis motion sensor

• Fanstel BM833F BLE 5.2 module.

• Cortex M4F MCU, 64 MHz with hardware DSP and floating point instructions.

• Flash/RAM: 512KB/128KB

• Range between 2 modules: 3000 meters at 125 Kbps, no obstruction. Estimated.

• Range for directional finding is much shorter, to be measured.

• Uses CR2032 batteries, not included

• $12.97 each at 1K pcs

SC833AF, Bluetooth 5.2 Beacon

• Fanstel BM833AF BLE 5.2 module.

• Cortex M4 MCU, 64 MHz with hardware DSP instructions.

• Flash/RAM: 192KB/24KB

• Range between 2 modules: 3000 meters at 125 Kbps, no obstruction. Estimated.

• Uses CR2032 batteries, not included

• $7.37 each at 1K pcs

SC805M, Bluetooth 5.2 Beacon

• Low cost, Nordic nRF52805 chip down design

• Cortex M4 MCU, 64 MHz with hardware DSP instructions.

• Flash/RAM: 192KB/24KB

• Range between 2 devices: 200 meters, no obstruction. Estimated.

• Uses CR2032 batteries, not included

• $4.44 each at 1K pcs