WM02C, WM02E, WM02F Nordic nRF7002 WiFi 6 Modules
The WM02C series WiFi 6 modules are the best for long life, battery-power products operate in 2.4 GHz and 5 GHz frequency bands. With an nRF53 or nRF54 modules, they support Matter applications.
The WM02C Series is a companion WiFi 6 module, providing seamless Wi-Fi connectivity and Wi-Fi-based locationing services. The WM02C Series can also be used with non-Nordic host devices. A Linux driver will be available from Nordic.
WiFi 6 Companion Module Summaries
WiFi 6 Range Measurements
WiFi ranges are the average of 12 measurements with an iPhone 14. WiFi module is rotated by 30 degrees after each measurement. SDK 2.5.0 default settings are used. WiFi ranges will be measured again after FCC certification.
Power Consumption Measurements
Power consumption: Vbat is 3.3V; transmits the maximum TX power to pass FCC certification testing.
WiFi idle, 14.46 uA;
WiFi scanning, 25.39 mA.
2.4 GHz WiFi connected, 3.98 mA, Power Saving ON; 51.07 mA, Power Saving OFF.
5 GHz WiFi connected, 2.39 mA, Power Saving ON; 54.96 mA, Power Saving OFF.
WM02C Features
Supports IEEE 802.11 a/b/g/n/ac/ax in the 2.4 GHz and 5 GHz bands.
Hosted by an nRF5340, nRF52840, nRF9160, nRF54 or other MCU through an SPI interface.
Low-power and secure Wi-Fi for the IoT
Ideal coexistence with Bluetooth LE
Supported in nRF Connect SDK
Target Wake Time (TWT)
SPI / QSPI
Wi-Fi 6 Station (STA)
1 Spatial Stream (SS)
20 MHz channel bandwidth
64 QAM (MCS7), 86 Mbps PHY throughput
OFDMA (Downlink and Uplink)
BSS coloring
Co-existence interfaces
40 MHz crystal embedded.
Carrier frequency is trimmed to within +/- 2ppm.
Operation Temperature: -40°C to +85°C
16 castellated pins.
Integrated shield to resist EMI
nRF7002 WiFi 6 Modules
WM02C
Uses an integrated horizontally mounted chip antenna for both 5GHz and 2.4GHz
Size: 12.0x18.7x2.0 mm
WM02V
Uses an integrated vertically mounted chip antenna for both 5GHz and 2.4GHz
The most TX power.
Size: 12.0x25.3x2.0 mm
WM02F
Uses a high performance PCB antenna for both 5GHz and 2.4GHz
Size: 12.0 (15.1 antenna area) x24.3 x 2.0 mm
WM02E
An u.FL connectors for external antenna for both 2.4 GHz and 5 GHz.
Size: 12.0x16.8x2.0mm
WM02P
Pads for antenna for both 5GHz and 2.4GHz on the host board.
Size: 12.0x12.9x2.0 mm
ANT036
Dual band WiFi 6 antenna, certified with WM02E and WM02P.
Host MCUs
nRF5340 modules, certified for BLE and 802.15.4, ready for Matter applications: BT40, BT40F, BT40E; BT40N, BT40NE (with nRF21540 PA for long range 802.15.4 applications)
Compact nRF5340 modules, certified for BLE only: BC40C, BC40M, BC40P.
nRF54 modules.
A Linux host
Certifications:
FCC ID: X8WWM02C
ISED ID: 4100A-WM02C
CE, RCM: Compliant.
Japan TELEC: 201-240555.
Taiwan NCC: CCAL24Y10760T9 (WM02C); CCAL24Y10764T4 (WM02V); CCAL24Y10761T1 (WM02E); CCAL24Y10763T2 (WM02P); CCAL24Y10762T0 (WM02F);
Order Products
For volume discount and production lead time, please email Fanstel
nRF7002 WiFi 6 companion module with a vertical mounted chip antenna. Supporting both 2.4 GHz and 5 GHz bands. The highest radiated TX power in the WM02C series. Made in Taiwan.
Size 12x25.3mm
nRF7002 WiFi 6 companion module with a chip antenna. Supporting both 2.4 GHz and 5 GHz bands.
Size 12.0x19.1x2.0mm
nRF7002 WiFi 6 companion module with an u.FL connector for external antenna. Supporting both 2.4 GHz and 5GHz bands.
Size 12x16.8mm
Certified with ANT036 dual band WiFi antenna, not included.
nRF7002 WiFi 6 companion module with pads for connection to anexternal antenna. Supporting both 2.4 GHz and 5GHz bands.
Size 12.0x12.9x2.0mm
Certified with ANT036 dual band WiFi antenna, not included.
nRF7002 WiFi 6 companion module with a high performance PCB antenna. Supporting both 2.4 GHz and 5 GHz bands.
Size 12.0 (15.1 antenna area) x 24.3 x 2.0mm
Dual band WiFi 6 antenna for 2.4 GHz and 5 GHz bands, with an SMA connector.
Includes a SMA to u.FL adapter cable, 100 mm long.
Size: 158mm
Evaluation board for WM02V, WiFi 6 module with a chip antenna supporting both 2.4 GHz and 5 GHz bands. The highest radiated TX power in the series.
Evaluation board for WM02C, WiFi 6 module with a chip antenna supporting both 2.4 GHz and 5 GHz bands.
Evaluation board for WM02E, WiFi 6 module with an u.FL connector for external antenna supporting both 2.4 GHz and 5 GHz bands.
ANT036 dual band WIFI antenna is required, not included.
EV board for WM02F, the nRF7002 companion WiFi 6 module with a high performance PCB antenna.
EV board for WM02P, nRF7002 WiFi 6 module with pads for WIFI 6 antenna connection.
ANT036, dual band WiFi 6 antenna needed, not included.