BT600I, BT600E Bluetooth Low Energy (BLE) Module

BT600I is a Bluetooth Low Energy (BLE) using Nordic SoC. A Chip antenna is integrated. All nRF51822 GPIO pins are accessible.

BT600E is a sister module with an u.FL connector for an external antenna.

Features

Processor: Nordic nRF51822 QFAB, v3.1

• Bluetooth Low Energy (BLE)

• Cortex M0 processor

• 128 KB flash, 16KB RAM

• AES HW encryption

• Host mode: connects to a host via UART, uses AT Commands

• Standalone mode: download firmware to flash memory

Peripherals

• 31 GPIO pins, firmware configurable

• UART, I2C, SPI, PWM, ADC

• Temperature sensor

• Low power comparator

• Timer and counter

Power:

• Operation voltage: 1.8V-3.6V

• Peak current: 13 mA RX, 10.5 mA TX.

• 0.6 uA OFF mode, 2.6 uA idle

RF Performance

• RX sensitivity: -93 dBm

• TX power: -20 to +4 dBm in 4 dB steps

• Line of Sight Range 20m (60 feet) to 50m (150 feet)

Miscellaneous

• Sizes: 20X12X3mm, 44 pins

• Operation: -25°C to +75°C

• Storage: -40°C to +85°C

• Integrated shield to resist EMI

• Evaluation board: EV-BT600I

Certifications:

• FCC ID: X8WBT600E

• IC (Industrial Canada) ID: 4100A-BT600E

• Europe: Approved

• Japan: 201-163100

• Australia: Approved

Download document

To order samples and evaluation board